HP 1000 Tower Nitrogen Generator


Please wait…


The new HP 1000 Tower Nitrogen Generator produces nitrogen by utilizing a combination of filtration and pressure swing adsorption (PSA) technology. Standard compressed air is filtered by high-efficiency coalescing filters to remove all contaminants down to 5 µm. The air then passes through two columns filled with a proprietary blended carbon molecular sieve (CMS) which adsorbs O2, CO2, and moisture. These are desorbed to the atmosphere during the pressure swing cycle leaving a supply of ultra-pure nitrogen.

The guaranteed flow rate of pure nitrogen is 1000 mL/min.

▪︎ Flow rate 1000 mL/min
▪︎ Purity >99.999%
▪︎ Pressure up to 5 barg (75 psig)
▪︎ Space-saving design
▪︎ Proprietary carbon molecular sieve
▪︎ Ideal for TGA & DSC applications
▪︎ 2-year standard warranty

View Product Brochure

Part# DB-N2T-1000-EU (220V/50Hz)
Part# DB-N2T-1000-US (115V/60 Hz)

▪︎ TGA & DSC

The following option is available:
▪︎ Catalytic oven

Flow mL/min 1000
Purity >99.999%
Hydrocarbon purity (measured as methane) N/A
Dewpoint ºC (ºF) -50 (-58)
Outlet pressure barg (psig) up to 5 max (75)
Inlet pressure barg (psig) 7 to 10 (100 to 160)
Actual inlet air requirement liters at 8 barg (psig) 17 (246.6)
Recommended compressor air inlet at 8 barg (psig) 34 (493.1)
Pressure drop barg (psig) 1.5 (22)
Inlet air quality Clean dry compressed air ISO8573-1:2010 Class 1.2.1
Technology Carbon molecular sieve
Warm-up time (minutes) 60
LED indicators Power on/off, system ready, errors
Electrical supply 110-120V 60Hz / 220-240V 50Hz
Power consumption watts 270
Noise level Minimal
Product dimensions mm (in) 175W x 490H x 670D (6.9W x 19.3H x 26.4D)
Product weight kg (lbs) 25.5 (56)
Shipping dimensions mm (in) 770W x 410H x 590D (30.3W x 16.1H x 23.2D)
Shipping weight kg (lbs) 30.5 (67)
Operating temperature ºC ( ºF) 15 to 35 (59 to 95)
Inlet connection 1/4" compression
Outlet connection 1/8"compression
Certification CE, FCC

You may also like

Recently viewed